30″ × 30″ × 30″
gaylord box
Lab waste, e-scrap sorting, small-parts kitting, mobile carts.
Quote 30″ × 30″ × 30″ boxes
Tell us what you have or what you need. A real person in Houston reads every one of these — usually within a couple of hours during dock time.
- Inside dimensions
- 30″ × 30″ × 30″
- Cubic volume
- 15.6 cu ft
- Weight capacity
- 500 – 900 lb
- Wall construction
- 2-wall
- Per 53′ trailer (KD)
- 1100 boxes
- Pallet
- 48" × 40" GMA
- Family
- Half & quarter
- Availability
- Regular stock
Why this size exists
A true cube that fits four to a pallet or one to a rolling cart. Popular with electronics recyclers who need a box a single person can drag across a floor when it is half full.
What it is used for
Lab waste, e-scrap sorting, small-parts kitting, mobile carts.
Wall count matters as much as footprint here. This size is stocked in 2-wall, and the capacity range of 500 – 900 lb spans that spread — the low end is the lightest construction, the high end the heaviest. Pick from the actual weight of a full box, not from the catalogue maximum.
Material density check
At 15.6 cubic feet, this box fills completely at these bulk densities before it reaches its weight limit:
| If your material weighs | A full box weighs | Verdict |
|---|---|---|
| 10 lb / cu ft | 156 lb | Volume-limited — consider a taller wall |
| 20 lb / cu ft | 312 lb | Volume-limited — consider a taller wall |
| 35 lb / cu ft | 546 lb | Volume-limited — consider a taller wall |
| 50 lb / cu ft | 780 lb | Volume-limited — consider a taller wall |
Rough guide: shredded film and foam sit around 4–10 lb/cu ft, mixed textiles 8–14, plastic regrind 20–35, e-scrap 35–60, and minerals or aggregate well above that. At 96 lb per cubic foot this box hits 1,500 lb exactly full.
Regular stock
Usually on the floor. Send the form for a current count before you plan around it.
Check availabilityFreight at a glance
About 1100 knocked down per 53-foot trailer. Assembled on pallets you get 26 pallet positions instead — roughly a quarter of the boxes for the same freight bill.
Run the load planner →Other sizes in the chart
| Size | Volume | Capacity | Per 53′ |
|---|---|---|---|
| 48″ × 40″ × 36″ | 40 cu ft | 1,200 – 2,800 lb | 480 |
| 48″ × 40″ × 30″ | 33.3 cu ft | 1,000 – 2,000 lb | 540 |
| 48″ × 40″ × 24″ | 26.7 cu ft | 900 – 1,800 lb | 600 |
Is 30" × 30" × 30" an inside or outside dimension?
Inside. Outside dimensions run roughly ½" to 1½" larger per side depending on wall count, which matters for racking and trailer fit but not for what you can put in the box.
Can I get this size in a different wall count?
We stock this footprint in 2-wall. Other wall counts are available as new builds, or occasionally we can cut down a taller box to this height from heavier stock.
What pallet does it need?
A standard 48" × 40" GMA pallet. Match the footprint exactly — overhang removes support from the corners, which carry most of a stacked load.